3.SHANG KAI EXPANDED METALS
|
Category |
Mesh Reference |
Material Type |
Mesh Opening |
Thickness (mm) |
Strand (mm) |
Weight 10% (kg/m 2) |
Standard Sheet Size |
||||||
|
SWD (mm) |
LWD (mm) |
S (mm) |
L (mm) |
||||||||||
|
Fine Meshes |
SKFM 1015 SKFM 2015 SKFM 1020 SKFM 1520 SKFM 1528 SKFM 2028 SKFM 2020 SKFM 2030 |
Steel Steel Steel Steel Steel Steel Steel Steel |
9 9 16 16 22 22 32 35 |
29 29 38 38 57 57 38 76 |
1.0 2.0 1.0 1.5 1.5 2.0 2.0 2.0 |
1.5 1.5 2.0 2.0 2.8 2.8 2.0 3.0 |
2.69 5.50 2.00 3.15 3.06 3.90 2.00 2.65 |
1800 1800 1800 1800 1800 1800 1800 1800 |
2400 2400 2400 2400 2400 2400 2400 2400 |
3000 3000 3000 3000 3000 3000 3000 3000 |
900 900 900 900 900 900 900 900 |
1200 1200 1200 1200 1200 1200 1200 1200 |
1500 1500 1500 1500 1500 1500 1500 1500 |
|
Medium Meshes |
SKMM 3035 SKMM 3045 SKMM 3060 SKMM 3030 SKMM 3050 SKMM 5050 SKMM 3075 |
Steel Steel Steel Steel Steel Steel Steel |
22 35 42 50 50 50 75 |
57 76 115 152 152 152 200 |
3.0 3.0 3.0 3.0 3.0 5.0 5.0 |
3.5 4.5 6.0 3.0 5.0 5.0 7.5 |
7.30 6.60 8.00 2.83 4.71 7.05 5.20 |
1800 1800 1800 1800 1800 1800 1800 |
2400 2400 2400 2400 2400 2400 2400 |
3000 3000 3000 3000 3000 3000 3000 |
900 900 900 900 900 900 900 |
1200 1200 1200 1200 1200 1200 1200 |
1500 1500 1500 1500 1500 1500 1500 |
|
Balustrade Meshes |
SKBM 3032 SKBM 3032A SKBM 3033 |
Steel Aluminium Steel |
25 25 30 |
40/81 40/81 50/110 |
3.0 3.0 3.0 |
3.2 3.2 3.3 |
6.05 2.09 5.90 |
1800 1800 1800 |
2400 2400 2400 |
3000 3000 3000 |
900 900 900 |
1200 1200 1200 |
1500 1500 1500 |
|
Walkway Meshes |
SKWK 50075 SKWK 50105 SKWK 30080 SKWK 50080 SKWK 50110 |
Steel Steel Steel Steel Steel |
25 30 30 42 45 |
75 75 75 135 135 |
5.0 5.0 3.0 5.0 5.0 |
7.5 10.5 8.0 8.0 11.0 |
23.50 27.50 12.55 14.95 19.50 |
1800 1800 1800 1800 1800 |
2400 2400 2400 2400 2400 |
3000 3000 3000 3000 3000 |
900 900 900 900 900 |
1200 1200 1200 1200 1200 |
1500 1500 1500 1500 1500 |
|
Louvre Art Meshes |
SKLM 1063 SKLM 1563 |
Steel Steel |
16 16 |
76 76 |
1.0 1.5 |
6.3 6.3 |
7.49 10.40 |
1800 1800 |
2400 2400 |
3000 3000 |
900 900 |
1200 1200 |
1500 1500 |
- Specifications normally refer to steel , product can be manufactured from aluminium and stainless steel.
- Manufacturing tolerance : S +50mm -0mm , L +19mm -5mm.
|
Walkway mesh Reference |
Type of Loads |
Simple Span(mm) |
Double Span(mm) |
Triple Span(mm) |
|
600 900 1200 |
300 450 600 |
200 300 400 |
||
|
SKWK 50075 SKWK 50110A |
Uniform Load(KN/m 2 ) |
5.80 2.50 1.50 |
23.80 10.70 6.10 |
51.00 25.40 14.60 |
|
Point Load(KN/m 2 ) |
1.30 0.85 0.64 |
2.95 1.97 1.50 |
4.55 3.18 2.42 |
|
|
SKWK 50105 SKWK 60075A |
Uniform Load(KN/m 2 ) |
8.2 3.65 2.02 |
33.80 15.30 8.66 |
70.00 36.10 20.50 |
|
Point Load(KN/m 2 ) |
1.80 1.22 0.92 |
4.20 2.80 2.12 |
6.40 4.56 3.45 |
|
|
SKWK 50080 SKWK 5075A |
Uniform Load(KN/m 2 ) |
4.90 2.25 1.22 |
20.00 9.00 5.21 |
43.85 21.40 12.14 |
|
Point Load(KN/m 2 ) |
1.10 0.74 0.54 |
2.50 1.68 1.27 |
4.00 2.68 2.04 |
|
| SKWK 500110 |
Uniform Load(KN/m 2 ) |
6.43 2.90 1.73 |
26.73 11.93 6.83 |
56.00 28.75 16.12 |
|
Point Load(KN/m 2 ) |
1.44 0.96 0.72 |
3.30 2.22 1.68 |
5.06 3.56 2.70 |
|
|
SKWK 30080 |
Uniform Load(KN/m 2 ) |
NOT Rocommended
|
7.25 2.61 1.82 |
19.13 8.50 4.78 |
|
Point Load(KN/m 2 ) |
1.32 0.53 0.44 |
1.43 0.96 0.72 |
Note :
- Load capacities given in the table are heaviest loads that will cause no permanent deformation with safety factor of 1.4 times.If some permanent deformation is allowed , loads can be increased by 40%.
- The load table is applicable based on spanning in LWM direction and spot-weld at every 4th strand on support and minimum 25mm landing on both ends.
- Spanning recommended based on assumption that deflection is not greater than 1/ 200 span.
- Spanning stated in table are nominal. Clear spans are obtained by deducting 25mm landing on both ends.
